Download PowerFlex® 700 Adjustable Frequency AC Drive

12
PowerFlex® 700 Adjustable Frequency AC Drive - Frames 0…6
Environment
Operating Temperatures
PowerFlex 700 drives are designed to operate at 0 to 40 °C ambient. To
operate the drive in installations between 41 and 50 °C, see the
information below and refer to pages 33 through 41 for exceptions.
Table B
Acceptable Surrounding Air Temperature & Required Actions
Enclosure Rating
IP20, NEMA/UL Type 1 (with Top Label) (1)
Temperature Range
0…40 °C
0…50 °C
IP20, NEMA/UL Type Open
(Top Label Removed) (1)
0…50 °C
0…45 °C
0…50 °C
IP00, NEMA/UL Type Open
(Top Label & Vent Plate Removed)
Flange Mount
Front - IP00, NEMA/UL Type Open
0…40 °C Back (External)
Back/Heat Sink-IP54, NEMA/UL Type 12 0…55 °C Front (Inside
Encl.)
Stand-alone/Wall Mount-IP54, NEMA/UL 12 0…40 °C
(1)
(2)
(3)
Drive
Frames 0…4, All Ratings
Frames 5…6, Most
Ratings (2)
Most Ratings (2)
20BC072 Only
20BC072 Only (3)
Frames 5…6
Frames 5…6
Removing the adhesive top label from the drive changes the NEMA/UL enclosure rating from Type 1 to
Open. Frames 5 and 6 do not have a top label.
Refer to pages 33 through 41 for exceptions.
To remove vent plate (refer to User Manual for location), lift top edge of plate from the chassis. Rotate the
plate out from the back plate.
101.6 mm
(4.0 in.)
101.6 mm
(4.0 in.)
101.6 mm
(4.0 in.)
PWR
PWR
STS
STS
No Adhesive Label
101.6 mm
(4.0 in.)
PWR
PWR
STS
STS
(see Table B)
PORT
PORT
MOD
MOD
NET A
NET A
NET B
NET B
PORT
MOD
NET A
NET B
With Adhesive Label
50.8 mm
(2.0 in.)
PORT
MOD
NET A
NET B
(see Table B)
101.6 mm
(4.0 in.)
101.6 mm
(4.0 in.)
Refer to pages 13 through 19 for
detailed dimension information.
101.6 mm
(4.0 in.)
101.6 mm
(4.0 in.)
Minimum Mounting Clearances
Specified vertical clearance requirements are intended to be from drive
to drive. Other objects can occupy this space; however, reduced airflow
may cause protection circuits to fault the drive. In addition, inlet air
temperature must not exceed the product specification.
Publication 20B-IN019C-EN-P