Download technology assessment task

18
ASSESSMENT ACTIVITY Nr.6
PREPARATION OF THE VEROBOARD
 Square and finished off Veroboard to exactly 60 mm x 17 mm?
 Avoid touching board with your fingers as this makes it greasy.
 Break the copper strips (where applicable) with 3,0 mm twist drill held in the hand.
 Fit wire connection/s between copper strips.
CHECKLIST
PREPARATION OF THE VEROBOARD
DESCRIPTION
Veroboard finished off Square and exactly 60 mm x 17 mm?
Complete break in copper strips (where applicable) with 3,0
mm twist drill held in the hand.
No greasy. fingers prints on board
Fit Wire connection/s between copper strips fitted correctly.
SELF
YES NO
PEER
YES NO