1
Download C115 User Guide
Transcript
User manual Note: Slight heating during charging is normal. When the charging icon becomes static, it indicates that the battery is full. 2.4 To switch ON and OFF To switch ON: Long press End key when the phone is in the OFF mode. If the phone lock has been activated, you need to enter the 4-digit password to unlock. (The preset unlock code is 0000.) If the UIM card has been inserted in the phone, and the related PIN code protection is activated, you need to enter the 4-8 digit password to unlock. Warning: If you enter three wrong PIN codes in a row, the UIM card will be locked and you need to enter the PUK code to unlock. Both the PIN code and PUK code are provided by the network operator. To switch ON/OFF: In the standby mode, long press End key. Page 17 of 39
