Download Dynamic Perception MX3 Motion Controller

7. [Enter] or [Right] to save the new value
6.8. Limiting Total Shots
You can specify a maximum number of shots to take in your film, after which the film will
automatically stop. This is done by changing the Max Shots parameter in the Camera menu.
Menu Navigation:
8.
1.
2.
3.
4.
5.
6.
[Enter] to enter the Main System Menu
[Up] or [Down] until Camera is selected
[Enter] to enter Camera menu
[Up] or [Down] until Max Shots is selected
[Enter] to edit the parameter
[Up] or [Down] to modify the value
[Enter] or [Right] to save the new value
Setting Max Shots to zero disables automatic stopping based on the exposure count
6.9. Full Manual Camera Control
You may set all parameters of the camera control cycle (Focus Time, Exposure Time, Delay,
Repeat Shots) manually by enabling Bulb Exposure Control and editing the values for each
parameter directly in the Camera sub-menu.
Page 21 of 45
Copyright © 2013 Dynamic Perception LLC
dynamicperception.com
All Contents licensed under the Creative Commons Attribution Share-Alike 3.0 License