Download manual

Edition 1.0
11/40
TKM60P User’s manual
After the language selection you enter the real programming panel of the TKM60P encoder
Picture 5 Programming panel for the TKM60P encoder.
) )
# $1 &
*,
3 4 $5
' 5 #$16
The programming panel is divided into five distinct sections:
•
•
•
•
•
Encoder parameters
Rotation
Write Parameters
Read Parameters
Serial interface monitor
The first section, concerning the Encoder parameters, enables the user to set all the functions foreseen for the
TKM60P multi turn absolute encoder at the date of this document. For example it will be possible to program the
resolution, the type of code generated in output, or the alarm thresholds and other functions that will be described
in detail in the continuation of this manual.
For the first time you use this programming software you had better select and then program one
single function at a time to avoid to program the non-requested parameters with consequent
cancellation of the current settings. When you will have acquired a higher control of the system it will
be possible to set different parameters at the same time by carrying out a multiple programming.
Any function, both in reading or in writing mode, has to be carried out when the encoder is not Working
(stopping shaft).
Remind that a function is selected, namely enabled in reading or writing mode, only if there is a tick
sign in the first column.
A generic function is considered in reading mode when in the subject field no value is indicated (you must select
and press the CANCEL key). In this way, by operating the
button the function is transmitted