Download metaglas
Transcript
Hydraulic Accumulator Measuring Unit 3.5 Material selection 3.5.1 Introduction Choosing proper material for the housing is one of the important challenges for our construction, the parts are static therefore we do not need to consider the factor of wear resistance due to motion. The most important factor is the surroundings with an external pressure up to 275 bars, and some places, as a second barrier, an internal pressure of 345 bar. As we know FMC Technologies has a wide experience from subsea installations, and has a great knowledge of which materials that can be used in these environments. We will in chapter 3.5.3 comment different materials that can be used for our assembly. 3.5.2 Challenges The main concern is the seawater surrounding the housing; the seawater is highly corrosive due to dissolved salts, ions. Therefore the material of the housing needs to have a high corrosion resistance. To protect the subsea installations from corrosion it is common to use a sacrificial anode on the installation, the anodes are generally cast aluminum alloys or in some cases zinc and magnesium alloys. Another challenge is the hydrostatic pressure the housing has to withstand; this comes from the weight of the seawater, in other words the sea column. As mentioned earlier the external pressure will be 275 bar. We also have to consider the viewing we need to have into the accumulator, this material needs to withstand an internal pressure of 345 bar and be transparent. Page 31