Download Thermo Desktop Programmer`s Manual `EPL2`
Transcript
FOREWORD This manual provides programming information for the Eltron brand printers, featuring Zebra’s Eltron Programming Language (EPL2) command language, which are manufactured by Zebra Technologies Corporation, Camarillo, California. COPYRIGHT NOTICE This document contains information proprietary to Zebra Technologies Corporation. This document and the information contained within is copyrighted by Zebra Technologies Corporation and may not be duplicated in full or in part by any person without written approval from Zebra. While every effort has been made to keep the information contained within current and accurate as of the date of publication, no guarantee is given or implied that the document is error-free or that it is accurate with regard to any specification. Zebra reserves the right to make changes, for the purpose of product improvement, at any time. TRADEMARKS Zebra, Eltron, EPL2, Strata, Orion, Xport and Eclipse are trademarks of Zebra Technologies Corporation. All other marks are trademarks or registered trademarks of their respective holders. REVISION HISTORY Rev. B – This version of the manual was for firmware version 2.23 and is available from Eltron in electronic form. Rev.C - This version of the manual was for firmware version 3.18 and is available from Eltron in electronic form. Rev.D - This version of the manual was for firmware version 3.20 and is available from Eltron in electronic form. Rev.E - This manual version coincides with EPL2 firmware version 3.99 and is available from Eltron in electronic form. See the Eltron web site at: www.eltron.com for an Adobe Acrobat file or call Zebra, Eltron Products Group, customer service. 980009-001 Rev.E iii