1
Download RAM Commander User Manual
Transcript
FMECA Option 443 Action 18.5.2.3 NHE Column Pop-up Menu Options Option Action Get from FM Library Opens the Failure Modes Library. Select an FM from the Failure Modes Library to be inserted into the current NHE cell. Add to FM Library Adds the current NHE to the Failure Modes Library. NHE List Opens the NHE list corresponding to the current IDN i.e. lists all FMs of the Next Higher Assembly (NHA) only for this NHA. Add NHE When the current NHE is the last before the EE, adds an additional column to the FM-NHE-EE chain. If the NHA corresponds to the first level in the product tree, then the NHA Selection window opens. When the current NHE has its own NHEs (more than one NHE column), adds the additional NHE to the current NHE. The new NHE will always be defined as “No effect”. Note When the NHE already has an NHE defined as “No effect”, you cannot add a new NHE until “No effect” has been changed to the “real” effect. In another words, each NHE can have only one effect defined as “No effect”. Delete NHE Deletes the current NHE and corresponding unshared chains up to the EE. 18.5.2.4 End Effect Column Pop-up Menu Options Option Action EE List Displays End Effects library. Select EE from the list to be inserted into the current EE cell Add EE Adds an additional End Effect to the NHE. Note A new End Effect is always defined as “No effect”. When an NHE already has an End Effect defined as “No effect”, you may not add a new End Effect until “No effect” has been changed to a “real” end effect. In other words, each NHE can have only one end effect defined as “No effect”. © 2014 ALD Software Ltd.
