1
Download PRIMER 10.0 user manual
Transcript
PRIMER User manual Version 10.0, June 2011 Alternatively, if you press More... a more detailed panel allows you change the layer definition. Layers can also be defined with multiple parts, part sets etc.. If you press More... to access the detailed layer panel then you can select multiple parts by selecting the Multiple checkbox. In this case you can add/remove multiple items from the layer definition. This is useful in some circumstances. e.g. if you are spotwelding a tailor welded blank then there could be multiple parts that represent the entire panel (as there are different thickness’ for each part). If you wanted to make spotwelds involving this then it is much easier to include all of the parts for the layer definition for the blank. If you didn’t then the part could vary depending on the position of the weld. Modifying connection include Right click a field of the conx inc columns and the Change conx include popup menu appears: To modify the connection coordinates, click on Change include. The standard include select panel will open. See section 5.1.6 for more information on the include selection panel. Listing the connection FE includes Right click a field of the FE inc columns and the FE include popup menu appears: This will print a listing to the screen with information regarding which include the various FE entities within the connection are in (nodes, beams etc.). Page 6.148
