1
Download Distributed Acoustic Control System
Transcript
DM Project 1998 Table 6–7: Test Performed Result General navigation OK Card and menu retrieval OK Variable adjustment OK Variable out of bounds detection OK Toggle Variable (max=1) system OK Execute Variable (max=0) system OK Cancel vs. submit OK Variable increment and decrement system OK Variable receive and transmit OK Correct card number upper right on display OK Menu and variable retrieval timeout OK Table 6–8: 6.9.2 Test of Menu System Using Test Box Test of Menu System Using Terminal Card Test Performed Result General navigation OK Card and menu retrieval OK Variable adjustment OK Variable out of bounds detection OK Variable transfer time out OK Toggle Variable (max=1) system OK Execute Variable (max=0) system OK Cancel vs. submit OK Variable increment and decrement system OK Variable receive and transmit OK Correct card number upper right on display OK Menu and variable retrieval timeout OK Bus Testing bus handling without the terminal card is a complex and time demanding procedure since this could only be done by simulation. Therefore, tests where only performed using the terminal card. An unknown error, probably due to the design of the FPGA software, occured when accessing the external bus. This limited the testability of the bus handling. The test is shown in Table 6–9.. 40
