Download AT Command reference guide for ZTEWelink Module

AT Command reference guide for ZTEWelink module
0 : AUTOMATIC order
1 : GSM_WCDMA prefer
2: WCDMA_GSM prefer
e.g.
AT+ZSNT=0,0,2
OK
3.3.8.9
Check Module Status +ZPAS
Syntax
Table 3.3.8-9: +ZPAS parameter command syntax
Command
Possible response(s)
+ZPAS?
+ZPAS: <network>,<srv_domain>
+CME ERROR: <err>
Description
This command is used to check module status, including the type of current network and service domain. This
command can just be used as read command (i.e. AT+ZPAS?).
When the network changes, the new type of network is routed to TE using unsolicited code.
Defined values
<network>: the type of current network
No Service
Limited Service
GSM
GPRS
EDGE
UMTS
HSDPA
HSUPA
HSPA
HSPA+
DC-HSPA+
LTE
<srv_domain>: service domain
CS_ONLY: CS domain service available.
PS_ONLY: PS domain service available.
CS_PS:
63
CS&PS domain service available.
All Rights reserved, No Spreading abroad without Permission of ZTEWelink