Download Digital-Analog Converter Module type AJ65SBT

Transcript
5
PROGRAMMING
MELSEC-A
POINT
Some CPU modules may not accept the devices used in the program example in
this chapter. For the setting ranges of the devices, refer to the user's manual of the
CPU module used.
For an A1SCPU, for example, devices X100 and Y100 or later cannot be used. Use
devices such as B and M.
(3) Initial settings
Setting Item
Settings
Analog output enable/disable setting (RWw2)
Output range/HOLD/CLEAR setting (RWw3)
Channels 1, 2: enable
Channel 1: 0 to 5V, CLEAR
Channel 2: user range setting 1, CLEAR
(4) Other settings
Setting Item
Settings
CH.1 digital value (RWw0)
500
CH.2 digital value (RWw1)
1000
CH.1 analog output enable/disable flag (RY00)
Enable
CH.2 analog output enable/disable flag (RY01)
Enable
5-3