Download User Manual
Transcript
Controller Installation 7.3 Controller Elements 7.4 Technical Data of the Controller Power on/off switch – The power switch is used to start or stop the system and as a reset switch. It does not work as power disconnect switch. Refer to “Table 2: Technical data of the PS controller” on page 19 for an overview of the most important technical specifications of the PS controller. Indicator Lights – The five LED lights on the front indicate different operational situations. For a detailed explanation refer to chapter “10 Operating the Pump” on page 60. Table 2: Technical data of the PS controller Model Pump motor: rated power Affiliated pump motor [kW] Max. DC input voltage Min. recommended Vmp Max.output current [V] [V] [A] PS150 Boost 0.3 ECDRIVE 150-Boost 50 17 18 PS150 0.3 ECDRIVE 150-C 50 17 18 PS200 0.3 ECDRIVE 200-HR 100 34 11 PS600 0.7 150 68 13 200 102 9.5 200 102 14 375 238 15 ECDRIVE 600-HR ECDRIVE 600-C ECDRIVE 600-CS-F PS1200 1.7 PS1800 1.7 ECDRIVE 1200-HR ECDRIVE 1200-C ECDRIVE 1200-HR ECDRIVE 1200-C ECDRIVE 1800-CS-F ECDRIVE 4000-HR PS4000 3.5 ECDRIVE 4000-C ECDRIVE 4000-CS-F 19