Download OPERATION MANUAL

Section
Overall Specifications
4-1
4-1
Overall Specifications
PC
CVM1 and CV
Series
Master model number
CVM1-DRM21-V1
Max. No.
of Master
o
e
i
Units
mountable
1
With Configurator
Without
Configurator
CS1 Series
C200HX/HG/HE
C200HS
C200HW-DRM21-V1
16
16
CPU Units with more
than 880 I/O points:
16
10
CPU Units with less
than 881 I/O points:
10
Master Unit mounting
position
CPU Rack or
Expansion CPU
Rack (classified as
CPU Bus Unit)
CPU Rack or Expansion CPU Rack (classified as CPU Bus Unit)
Cannot be mounted to Expansion I/O Rack, or to SYSMAC BUS or
SYSMAC BUS/2 Slave Racks.
Cannot be mounted
to Expansion I/O
Rack, or to SYSMAC
BUS or SYSMAC
BUS/2 Slave Racks.
Commuc o
nications
supported
Remote
I/O
Messages
Supported
Remote
I/O communications
Max. No.
of Slaves
per Master
Unit
63
Max. No.
of controlled
points per
Master
Unit
With Configurator:
6,400 pts
(100 words x
4 blocks)
Max. No.
of I/O
points per
Slave controllable
by Master
Message
communications
Max. No.
of nodes
per Master
Unit
Instructions used
Supported
Not supported, but
Master Unit will
respond to
commands
addressed to it.
With Configurator:
50
Without Configurator: 63
With Configurator:
Without messages:
4,800 pts
With messages:
1,600 pts
Without Configurator:
2,048 pts
Without Configurator:
(64 input/64
1,600 pts
output words)
(50 input/50 output words)
32 input/32 output words
FINS commands:
8
FINS commands:
8
Explicit messages: 6
3
Explicit messages: 63
Data send/receive:
SEND(192)/REC
V(193)
Data send/receive: None
FINS commands:
With Configurator:
32
Without Configurator:
63
With Configurator:
1,280 pts
Without Configurator:
1,024 pts
(32 input/32
output words)
Not supported.
Not supported.
IOWR
FINS commands:
CMND(194)
Software switches
1 word (scan list register/clear, remote I/O communications start/stop, etc.)
Status
11 words (status data area, registered Slave data, normal Slave data, current
communications cycle time)
34