Download GEM-K2AS Keypad User Guide
Transcript
K E Y P AD C O N T R O L S & I N D I C AT O R S
1
Window. Displays system status
messages, zone descriptions, etc.
(2) Unbypasses a bypassed zone
(GEM-P9600/3200 panels only).
2
STATUS Light. Lights (green) to 6
indicate that the system is ready
for arming. If a zone is not
secured the light will be off and
the zone will display in the
7
window. If a zone has been
bypassed, the STATUS light will
8
blink while armed.
RESET Button. (1) Resets
various system troubles, displays,
etc. (See text.) (2) Resets
residential smoke detectors.
3
4
ARMED Light. Lights (red) to
indicate that the system is armed.
If an alarm has occurred, the 9
ARMED LED will be flashing.
MENU Button. Selects available
system functions as displayed in
the window. The selected function
is executed by pressing the U
button.
5
BYPASS Button. (1) Deactivates
selected zones from the system.
the window display.
10
AWAY Button. (1) Arms all zones
in the system, with display
indicating the exit time remaining.
(2) Scrolls window display
backward (PRIOR). (3) Answers
“NO” to questions in the window
display.
ENTER Button. Entry key. 11
Causes the entered code or
selected function to be executed.
AREA Button (G). Selects
Numerical Keys (1-9, 0). Used to
enter codes, zone numbers, etc.
other areas and is used with
emergency buttons.
STAY Button. (1) Bypasses all 12 Emergency Buttons. Used with
the G button to signal an
Interior Zones simultaneously
("STAY Mode") to allow free
emergency, as follows:
movement within the premises.
Press the 7 and the G
Hold down P when the
buttons for Fire Emergency.
system is armed in "STAY Mode"
Press the 8 and the G
to cancel entry delay on Exit/Entry
Zones, causing an instant alarm
buttons for Auxiliary Emergency.
upon violation. (2) Scrolls the
Press the 9 and the G
window display forward (NEXT).
buttons for Police Emergency.
(3) Answers “YES” to questions in
5