Download Nokia C910 User`s Guide

Transcript
Installation
Caution: Do not insert a PC card into the PCI adapter until
the installation of the software has been completed and you
have restarted the computer.
Note: Make sure that your computer has enough resources
for the PCI adapter and the wireless LAN card. See
“Troubleshooting” on page 4.
To install the hardware
1 Make sure that the computer is switched off and unplugged.
2 Ensure that you are properly grounded.
3 Remove the cover of the central processing unit and locate a free
PCI slot for the PCI adapter.
Note: For more detailed information on removing the cover
and on the PCI slots, please consult the user manual of your
computer.
4 Insert and secure the PCI adapter into the PCI slot.
5 Close the cover of the central processing unit.
To install the software
1 Switch on the computer and start Windows.
Caution: If your operating system is Windows 95 or 98, the
PC Card Wizard starts to install drivers for the new PCIPCMCIA bridge it has detected. Click Cancel to stop the PC
Card Wizard.
2 Insert the installation diskette into the diskette drive of the
computer.
3 From the Start menu, select Run and type A:\setup (provided
that drive A: is your diskette drive). Click OK.
4 A welcome screen opens. Click Next to continue.
2