Download STR750-EVAL evaluation board

Transcript
2 Hardware layout and configuration
2.12
STR750-EVAL
Joystick
STR750-EVAL evaluation board includes a 4-position joystick (U18). When used, the joystick
“up position” is connected to P0.08 of the STR750Fx. Otherwise this pin can be used to drive
an I2C component via the daughter board connectors. Use of pin P0.08 for either of these two
functions is controlled using JP18.
Table 8.
Joystick jumper
Jumper
Description
JP18
JP18
P0.08 is used in its alternate function I2C_SCL and connected to
the daughter board connector (CN7, pin 38) when JP18 is set as
shown on the right:
1
2.13
P0.08 is connected to the joystick when JP18 is set as shown to
the right:
(Default setting)
1
JP18
Development and debugging tool support
The STR750-EVAL evaluation board supports connection to In-Circuit Emulators (ICE) via a
20-pin standard JTAG interface (CN9).
2.14
Display and input devices
122x32 pixel graphic LCD and 4 general purpose LED's (LD2, 3, 4, 5) are available as display
devices. A 4-direction joystick with selection key, a general purpose button (PB3) and a wake
up button (PB2) are available as input devices.
STR750-EVAL also supports a second optional 2x16 character LCD that can be mounted on
the connector U15.
Table 9.
LCD modules
Graphic LCD U16 (default)
Pin on U16
14/40
Description
Pin on
STR750F
Character LCD U15 (optional)
Pin on U15
Description
Pin on
STR750F
1
GND
GND
1
GND
GND
2
VDD
3.3V
2
VDD
3.3V
3
VO
3
VO
4
RS
4
RS
P2.02
5
NC
5
RW
P2.01
6
E2
6
E
P2.00
7
NC
7
DB0
P2.10
8
E1
P2.01
8
DB1
P2.11
9
RW
P2.02
9
DB2
P2.12
10
DB0
P2.10
10
DB3
P2.13
11
DB1
P2.11
11
DB4
P2.14
P2.03
P2.00