Download STR750-EVAL evaluation board
Transcript
2 Hardware layout and configuration 2.12 STR750-EVAL Joystick STR750-EVAL evaluation board includes a 4-position joystick (U18). When used, the joystick “up position” is connected to P0.08 of the STR750Fx. Otherwise this pin can be used to drive an I2C component via the daughter board connectors. Use of pin P0.08 for either of these two functions is controlled using JP18. Table 8. Joystick jumper Jumper Description JP18 JP18 P0.08 is used in its alternate function I2C_SCL and connected to the daughter board connector (CN7, pin 38) when JP18 is set as shown on the right: 1 2.13 P0.08 is connected to the joystick when JP18 is set as shown to the right: (Default setting) 1 JP18 Development and debugging tool support The STR750-EVAL evaluation board supports connection to In-Circuit Emulators (ICE) via a 20-pin standard JTAG interface (CN9). 2.14 Display and input devices 122x32 pixel graphic LCD and 4 general purpose LED's (LD2, 3, 4, 5) are available as display devices. A 4-direction joystick with selection key, a general purpose button (PB3) and a wake up button (PB2) are available as input devices. STR750-EVAL also supports a second optional 2x16 character LCD that can be mounted on the connector U15. Table 9. LCD modules Graphic LCD U16 (default) Pin on U16 14/40 Description Pin on STR750F Character LCD U15 (optional) Pin on U15 Description Pin on STR750F 1 GND GND 1 GND GND 2 VDD 3.3V 2 VDD 3.3V 3 VO 3 VO 4 RS 4 RS P2.02 5 NC 5 RW P2.01 6 E2 6 E P2.00 7 NC 7 DB0 P2.10 8 E1 P2.01 8 DB1 P2.11 9 RW P2.02 9 DB2 P2.12 10 DB0 P2.10 10 DB3 P2.13 11 DB1 P2.11 11 DB4 P2.14 P2.03 P2.00