Download TurboVap II®

Introduction
13
Convenience
The TurboVap II enables you to start a run of samples and leave the
instrument unattended. When the concentration has finished, the
gas turns off automatically and the concentrator sounds an alarm
every 30 seconds until the samples are removed or Start/Stop is
pressed.
Mild Conditions
The water bath provides sufficient warming without harming sample
recovery.
Multiple Sample Processing
The concentrator nozzle block has six nozzles that extend into the
tubes to supply gas for concentration. This allows up to six samples
to be processed simultaneously.
Requires No Hood
The flip-down cover and exhaust system permit the unit to be
placed on the bench rather than taking up valuable hood space.
Independent Operation
Concentration for each cell can be independently started or stopped
at any time.
Vapor Removal
The solvent vapors are removed by an exhaust fan to the exhaust
port in the back of the unit. From the exhaust port, the venting hose
must be routed to a suitable outside ventilation system.
P/N 128099 Rev. 00
TurboVap II User’s Manual
Biotage AB