Download User`s Manual
Transcript
Command Interpreter of all system variables. Write-protected variables cannot be changed explicitly by the user. Only system variables may be write-protected. Global variables are always visible, except when they are hidden by local variables with the same name. Variables that are not declared in a var statement or passed as parameters to a macro are global. In particular, all system variables are global variables. Local variables exist only within the macro where they are declared, and in macros called from this macro. Local variables must be declared in a var statement or passed as parameters to a macro (see p. 37). The following variables are used by the command interpreter: echo determines which commands are echoed, i. e. copied to standard output before execution. The possible settings are: NULL (or not set at all) In macros, commands that are not built into the command line interpreter (see p. 21) are echoed; interactively, commands are not echoed. on Commands that are not built into the command line interpreter are echoed regardless of whether they occur in macros or interactively. full All commands are echoed, and the corresponding line numbers in macros are given. off Commands are not echoed. Labels are not included in the echo; variable substitutions are included in the echo. Statements that are preceded by “ @” will only be echoed if the system variable echo has the value full. erract is a variable for error handling. If an error occurs within a macro,1 the value of erract is executed as command. By default the exit command is executed, i.e. the program returns to interactive input. Errors that occur interactively are displayed and the program continues with the execution of the next statement Example: set erract=chain show ; quit With this setting of erract, in case of an error a listing of all global variables is given, and the program is stopped. Such error handling can be useful if the program is used non-interactively. nparam denotes the number of command line parameters passed to a macro (see p. 19). 1 18 Errors that occur interactively are displayed and the program continues with the execution of the next statement.