1
Download Instruction Manual
Transcript
IM02602004E ETR-4000 System Module Input States Name Description Assignment Via Ack LED-I Module Input State: LEDs Acknowledgment by Digital Input. [Device Para /Ex Acknowledge] Ack RO-I Module Input State: Acknowledgment [Device Para of the Relay Outputs. /Ex Acknowledge] Ack Comm-I Module Input State: Acknowledge [Device Para Communication via Digital Input. The /Ex Acknowledge] replica that Communication has received from the device is to be reset. PS1-I State of the module input, [Protection Para respectively of the signal, that should /PSet-Switch] activate this Parameter Setting Group. PS2-I State of the module input, [Protection Para respectively of the signal, that should /PSet-Switch] activate this Parameter Setting Group. PS3-I State of the module input, [Protection Para respectively of the signal, that should /PSet-Switch] activate this Parameter Setting Group. PS4-I State of the module input, [Protection Para respectively of the signal, that should /PSet-Switch] activate this Parameter Setting Group. Maint Mode-I Module Input State: Arc Flash Reduction Maintenance Switch www.eaton.com [Service /Maint Mode] 553
