Download Integrated Modular Avionics for Space Applications
Transcript
in the sense that has no knowledge of routing; it only writes a data packet. All the routing was taken care by the router task . Once all write requests are written to the bus, the driver checks for incoming data and appends it to its physical device structure . This starts the read cycle. 6.4 Configuration The configuration process of the component relies on an independent tool chain. The configuration defines: • The logical addressing used by applications (logical devices and respective routes); • The mapping to the physical addressing used with the I/O drivers (physical devices and respective routes); • The selection of a set of device drivers; • Device configuration parameters, such as the use of DMA, DMA memory areas, etc; • Inter-partition communication ports or shared memory segments; A tool chain fulfilling those needs is represented in Figure 6.5. Figure 6.5: I/O Configuration toolchain 51