Download User Manual

Operating Manual
NOTE
This manual describes the installation and operation of Quick Ray Master UATM-272.
Review this manual to avoid injury and prevent damage to this product or any products connected to it before
you operate this instrument. To avoid potential hazards, use this product only as specified in this manual.
This documentation contains information and warnings that must be followed by the user to ensure safe
operation and to maintain the product in a safe condition.
Customer shall be responsible for paying all shipping charges, duties, taxies, and any other charges for any
failure or damage or injury caused by improper use or improper or inadequate maintenance and care. Unitma
Co., Ltd. shall not be obligated to furnish service under this case a) to repair damage resulting from attempts by
personnel other than Unitma Co., Ltd. representatives to install, repair or service the product; b) to repair damage
resulting from improper use or connection to incompatible equipment; c) to repair any damage or malfunction
caused by the use of non-Unitma Co., Ltd. supplies; or d) to service a product that has been modified or
integrated with other products when the effect of such modification or integration increases the time or difficulty of
servicing the product.
Copyright© Unitma Co., Ltd. All rights reserved. Licensed products are owned by Unitma Co., Ltd., and are
protected by national copyright laws and international treaty provisions. Unitma Co., Ltd products are covered by
patents, issued and pending. Specifications and price change privileges reserved.
Quick Ray is registered trademarks of Unitma Co., Ltd.
All Information is subject to change without prior notice.
Contacting Unitma Co., Ltd.
UNITMA Co., Ltd. 3F, Chungmyeong B/D, 224-8,
Jamsil-Dong, Songpa-Ku, Seoul, 138-220, Korea
Tel:
+82-2-420-0070
Fax:
+82-2-420-9797
http://www.unitma.com
E-mail: [email protected]
2