Download User Manual

Operating Manual
4.2. Setup
4.2.1. Assembling the tip body into the instrument
• Tip bodies are assembled when you receive the instrument. If the Tip needle
becomes damaged or looses sharpness you need to change them as the
following instructions.
• The tip body should be assembled into the correct position in the tip body
holder of the instrument.
1) Turn off the instrument.
2) Open the cover door.
3) Assemble the tip body into the tip body holder of the instrument.
3)
4) Close the cover door.
4.2.2. Interfacing with external devices
• Any electrical external devices interfaced with the instrument should be
connected to ground.
z
External device list
1) Monitor with a DVI port
2) Mouse with an USB port
3) Keyboard with an USB port
4) USB Memory stick
5) Printer with an USB port
6) PC with an LAN port
21