Download User Manual

Transcript
Calibration
51
Calibration of the pressure measurement
We recommend an examination of the calibration once a year.
Operate the function key pressure in the adjust-menu. The calibration of
the pressure measurement works like described for the temperature
calibration at up to six points. After the input of two points you have the
choice whether to terminate the calibration (function stop input), or to enter
further values (function another input). The pressure probe is applied with
known pressure, and then the values will be entered successively via the
numeric keyboard and confirmed with >ENTER<. The calibration points
for the measurement on dialysis machines should be at -400, -100, 0, +100
and +500 mmHg. If you call the function stop input after your input, the
entered values will be indicated once more, and can be taken over with the
ok-key.