Download Quartet imaging Housing Frame
Transcript
3.11 imaging Extender Module The optional imaging extender module allows easy access to any imaging series modules requiring testing, repairs, or calibration. In order to install the extender module, remove the imaging module under test from the housing frame. Replace it with the extender module. Insert the module under test in the extender module making sure it is firmly installed. Refer to the Figure 3.13. To remove the module under test, simply push on the ejectors situated at the front of the extender module and pull out the module under test. To remove the extender module, carefully pull on it in order to detach it from the housing frame's rear motherboard. For complete instructions on module installation and module removal, refer to sections 3.7 and 3.8 respectively. Figure 3.13 imaging extender module setup imaging Extender Module To imaging Quartet Tray Install module under test here Ejector used to remove module under test (To remove module, push ejector in direction of arrow.) 23