Download Downloading - AD INSTRUMENTS

Chapter 17 Printer
Loading a new paper roll
Releasing the
printer back
into the
module.
To release the printer, hold the module while you push on the lever.
It is important to hold the module while you push on the lever. If you
don’t, you may stuck your finger and/or damage the internal printer.
Loading a new paper roll
In order to load a new paper roll, proceed as follows:
1
Expose the printer outside of its module (see "Exposing the printer"
page 280)
2
Set the lever to position A
3
Insert the paper roll as shown on figure "Loading paper in the
printer" page 281)
4
Fold the paper to ease loading
5
Ensure paper is enrolled as shown on figure "Loading paper in the
printer" page 281)
6
Pull paper through opening in panel
7
Reset the lever to position C
5 -Ensure paper is
unrolled as shown
4 -Fold the
paper to ease
loading
2- Lever in
position A
Fig. 135
User Manual
3 - Push in opposite direction
to insert the paper roll
Spare paper roll may
be inserted here
Loading paper in the printer
780000102/16
281