Download Instruction Manual

1. PACKING LIST AND PART NAMES
HAKKO FR-400 Desoldering station
HAKKO FR-4001 Desoldering Handpiece
(with ø1.0mm [0.04 in] nozzle)
Power cord
1
1
1
Please check to make sure that all items
listed below are included in the package.
Handpiece holder (with Cleaning wire)
Toolbox
Instruction Manual
1
1
1
Nozzle
(N60 series)
HAKKO
FR-4001
Handpiece holder
HAKKO FR-400
Station
Power cord
Toolbox
×1
×4
Ceramic paper Filter
(Desoldering handpiece)
×2
Station
Filter
×1
Cleaning Pin (for ø1.0mm
[0.04 in] nozzle)
Cleaning Drill (for ø1.0mm
[0.04 in] nozzle)
×1
×1
Cleaning Pin
(for Heating Element)
Nozzle wrench
2. SPECIFICATIONS
● HAKKO FR-400
Power consumption
Temperature range
Temperature stability
320W
350 - 500℃ (660 - 940℉ )
± 5℃ (9℉ ) at idle temperature
● Station
Output
Dimensions
AC 29V
160(W) × 137(H) × 235(D) mm
(6.3 × 5.4 × 9.3 in.)
Weight
5.7 kg (12.6 lb.)
Vacuum generator
Vacuum pump, double cylinder type
Vacuum pressure (max.) 80 kPa (600 mmHg)
Suction flow
15ℓ/min.
1
● HAKKO FR-4001
Part name
Power consumption
Nozzle to ground resistance
Nozzle to ground potential
Length (w/o cord)
Weight (w/o cord)
Cord
HAKKO FR-4001
300W（29 V）
<2Ω
< 2 mV
183 mm (7.2 in.) with ø1.0mm [0.04 in] nozzle
245 g (0.54 lb.) with ø1.0mm [0.04 in] nozzle
1.2 m (4 ft.)
* The temperature was measured using the HAKKO FG-101
Station Tester.
* This product is protected against electrostatic discharge.
* Specifications and design are subject to change without notice.