1
Download Manual
Transcript
ARS-2212 Chapter 2 Installation 2.1 ARS-2212 Hard Disk Installation 1. First secure the hard disk handles included in the packaging to the hard disks with the screws provided as shown in the picture below: I. II. III. 2. Unscrew and remove the ARS-2212 front panel as shown in the picture below: I. 3. II. Now insert the SATA hard disks fitted with the hard disk handles into the ARS-2212 along the guide rails with the front side facing upwards. Push the hard disks until the contacts are securely attached as shown in the picture below: I. II. HDD 1 Note: To fit along guide rack HDD 2 7
