Download TOC-VCPH/CPN & TOC-Control V Software

4.4 Sample Table Editor
4.4.2 File Menu
4.4.2.5 Close
The Close command is used to close the current window and is an option only when a file is
open. If the open file has not been saved and the Close command is selected, the Save As
dialog box is displayed. Refer to Section 4.4.2.7 "Save As". Enter a name for the file and
click the OK button to save the file. If the open file has been modified but not saved and the
Close command is selected, a dialog box is displayed as shown below. Click the Yes button
to save the file before closing. Click the No button to close the file without saving the
modified information. Click the Cancel button to abort the Close command.
Figure 4.92 Dialog box for Saving Modified Data
4.4.2.6 Save
The Save command is used to save data in the current active file. If the file has not yet been
saved and the Save command is selected, the Save As dialog box is displayed. Refer to
Section 4.4.2.7 "Save As".
TIP »
144
The Save command can also be executed by selecting the Save File button on the Toolbar.
TOC-VCPH/CPN