Download installation and setup guide for cameras used with basler`s pylon api

AW00061103000
Installing an IEEE 1394 Camera
10. Notice that your camera is now listed (by model name) under the Basler pylon 1394 Digital
Cameras. Any device listed under the Basler pylon 1394 Digital Cameras device class is
associated with the Basler pylon 1394 driver.
If there are multiple cameras of the same model listed under the device class, they will be listed
by the model name followed by "camera 1", "camera 2", etc.
Click the Cancel button to close the Hardware Update Wizard window.
11. If you use only one IEEE 1394 camera with your computer, your IEEE 1394 camera is now
associated with the desired camera driver. You can close the Device Manager window and exit
this procedure.
If you use more than one IEEE 1394 camera with your computer, perform steps 2. through 10.
for each IEEE 1394 camera.
6.2.3
Modifying Your Software Installation
You can install a software feature that you initially had deselected during the installation or remove
a software feature that you initially installed, any time you want.
Note
The software feature to be installed must have the same version number as the
Basler pylon software currently installed on your PC.
If in doubt, obtain the latest version of Basler pylon software and install it.
1. Make sure your camera is disconnected from your computer.
2. Use the Windows Add or Remove Programs function to add or remove a software feature:
„
Windows XP: Start > Control Panel > Add or Remove Programs
„
Windows Vista: Start > Control Panel > Programs > Programs and Features
Installation and Setup Guide for Cameras Used with Basler’s pylon API
73