1
Download 8.5 Settings - Merging Technologies
Transcript
15 Synchronization 15.6 Remote Control VCube with a Sony 9-pin Controller VCube can be remote controlled by a Sony 9-pin compatible device. In Settings: Formats & Sync, configure the control panel as below. Sony 9-pin Remote control must also be set as below. By default the Serial Port should be set to COM3. This port is named COM2 in settings specific panel for early VCubes featuring an ASUS mother board. Stop empties audio buffers. Pause keeps audio data in buffers The RS-422 configurator switch must be set to "From Controller" if you use this port. In this configuration, Video and Audio References can be used or not. 15 188
