Download Recording Component: RC-L/RC-E

Failover configuration RC-L / RC-E User Manual
Add Ocularis CS servers
Even if the Ocularis CS system has an internal master/slave setup, you cannot reuse it in your Ocularis ES system.
You must add each Ocularis CS server that you need device data from individually.
To add an existing Ocularis CS server to your system:
1.
From the Management Client’s Tools menu, select OnSSI Compatible Recording Servers.
2.
In the Add/Remove dialog box, click Add.
3.
Enter the IP address or the host name of the Ocularis CS server.
4.
Enter the port number used by the Ocularis CS server.
The default port number is 80. If in doubt, you can find the port number in Ocularis CS’s Management
Application under Server Access.
5.
Enter the user credentials for the administrator of the Ocularis CS server to give yourself unlimited rights to
the device data from it.
6.
If the Ocularis ES system accesses the Ocularis CS server through an Internet connection, click Network to
specify the WAN address of Ocularis ES’s management server. You need only define the WAN address
once.
Next step is to give your users access to devices from the Ocularis CS server.
Define roles with access to Ocularis CS servers
To give the users access to devices from the added Ocularis CS servers:
1.
On the Ocularis CS server, open the Management Application to find an Ocularis CS user who has user
rights you can reuse and match with a role in your Ocularis ES system. If not, create a new Ocularis CS user
that matches the role in your Ocularis ES system.
2.
Take careful note of the Ocularis CS user's user name, password and authentication type (basic or
Windows). The Ocularis ES system does not verify that the information you specify later in these steps
corresponds to a defined user in Ocularis CS.
3.
In the Ocularis ES Management Client’s Site Navigation pane, expand Security, and select Roles.
4.
Select the role you want to use or define a new role.
5.
At the bottom of the Role Settings pane, select the Servers tab and then the Ocularis CS server under
OnSSI Compatible Recording Servers.
6.
Select the Ocularis CS user with the user rights you want to match with your role.
7.
Click Save.
Edit Ocularis CS servers
To edit an Ocularis CS server added to your system:
152
1.
From the Tools menu, select OnSSI Compatible Recording Servers.
2.
Select the Ocularis CS server from the list, and click Edit.
3.
Edit the relevant settings and click OK.
On-Net Surveillance Systems, Inc.