Download Instruction Manual

• NAT traversal Settings:
- Enable: when enabled, the Network Transmitters attempt to configure port mapping in
a NAT router on your network, using UPnP™. Note that UPnP™ must be enabled in
the network camera (see Setup > System > Network > UPnP, on ―4.5.5 System > 4)
Network >
UPnP‖).
* automatic setting: The network camera automatically search for NAT routers on
your network.
* manual setting: Select this option to manually select a NAT router and enter the
external port number for the router in the field provided.
Notes:
- If you attempt to manually enter a port that is already in use, an alert message will be
displayed.
- When the port is selected automatically it is displayed in this field. To change this enter a
new port number and click Save.
5) Language
It will be able to select a user language. The type of language it will be able to select is the
English, the French, the German, the Spanish and the Italian.
43
VK2-600PTZ User manual