Download Model 4200-SCS Semiconductor Characterization System

Model 4200-SCS User’s Manual
Section 3: Common Device Characterization Tests
Figure 3-13
CVU terminal properties window
By default (reset), AC drive is applied to the CVH1 terminal and the current measurement is made
at the CVL1 terminal. A drop-down menu sets the range for the current measurement (Auto, 1µA,
30µA, or 1mA). The terminal properties can be toggled by clicking one of the other AC radio
buttons.
By default (reset), DC bias is also applied to the CVH1 terminal. DC bias can instead be applied to
the CVHL terminal by clicking one of the other DC radio buttons.
Figure 3-14 shows the four possible configurations for terminal properties.
4200-900-01 Rev. H / February 2013
Return to Section Topics
3-17