Download Hitachi FLASH Microcomputer Programming System Hitachi FLASH

6.16 Erase Blocks
Invoked by [Device->Erase FLASH blocks…], the Workspace Project pop-up menu item Erase FLASH
blocks…, the Toolbar Erase Blocks and the Erase FLASH blocks… command from the FLASH Controller.
The ‘Erase Blocks’ dialog box allows the user to specify which blocks to erase. The Written column indicates
whether data exists in the block.
Select All
Clicking on Select All will select all the blocks of the device FLASH memory.
Select Written
Clicking on Select Written will select only those blocks that are not empty.
Erase
Clicking on Erase will erase the data in the selected blocks and removes the ‘Erase Block’ dialog box.
Cancel
Clicking on Cancel removes the ‘Erase Blocks’ dialog box without performing an erase operation.
Note
54
Whilst blocks that contain no data need not be erased, FDT will erase all the specified blocks.