Download NC-AD300XD

NC-AD300XD Manual
Network mode: two options, the network side or user side. can not be the same at both
ends.
Calling attributes, caller screening, caller display, called attributes, set the number of
properties, usually select the default value.
MfcVallDelay: When receiver number, if the number is passed by bit, will wait this value of
ms(second) for next bit. If longer than this time but did not receive next bit, then the number
receiving has been completed.
On the SS7 signaling parameters are as follows:
Link ID, the Link ID in this PCM , see description of SS7 link in later chapter, SS7 link
should be added before configuration the SS7 parameters.
25