Download ACU+ Controller User Manual

Transcript
NetSure™ ACU+ Controller (Advanced Control Unit Plus)
User Instructions, UM1M820BNA (Issue L, December 11, 2014)
Introduction
•
Intelligent Power Matching (Energy Optimization Mode)
Preface
•
Power Split Feature
•
Diesel Management Feature
•
PLC (Programmable Logic Controller) Function
•
Supervisory Module (SM Modules) Monitoring
•
Hybrid Control Function
•
Maximum Current Limit Function
These instructions describe the complete functionality of the
ACU+ Controller. Some functionality is dependent on hardware
connected to the ACU+ Controller. Your system may not utilize all
the functionality described.
Refer also to the ACU+ Configuration Drawing (C-drawing)
furnished with your system for a list of factory default settings.
Overview
The ACU+ controls the system automatically via configured
parameters.
The ACU+ Controller performs the following functions.
•
Rectifier Control, including an Energy Optimization Mode
•
Converter Control
A User interfaces with the ACU+ Controller locally using the local
keypad and LCD display or locally/remotely using the WEB
Interface.
•
System Components Monitoring and System Alarms
Generation (including recording alarms in logs)
The ACU+ Controller can also be accessed via SNMP (v1, v2, and
v3).
•
Operating Data Acquisition and Data Logs
•
Battery Management
Figure 1 illustrates the various applications that can be used to
interface with the ACU+ Controller.
Figure 1. Interfacing with the ACU+
Spec. No: 1M820BNA, 1M820DNA
Model No: M820B, M820D
1
Code: UM1M820BNA
Issue L, December 11, 2014