Download ACU+ Controller User Manual
Transcript
NetSure™ ACU+ Controller (Advanced Control Unit Plus) User Instructions, UM1M820BNA (Issue L, December 11, 2014) Introduction • Intelligent Power Matching (Energy Optimization Mode) Preface • Power Split Feature • Diesel Management Feature • PLC (Programmable Logic Controller) Function • Supervisory Module (SM Modules) Monitoring • Hybrid Control Function • Maximum Current Limit Function These instructions describe the complete functionality of the ACU+ Controller. Some functionality is dependent on hardware connected to the ACU+ Controller. Your system may not utilize all the functionality described. Refer also to the ACU+ Configuration Drawing (C-drawing) furnished with your system for a list of factory default settings. Overview The ACU+ controls the system automatically via configured parameters. The ACU+ Controller performs the following functions. • Rectifier Control, including an Energy Optimization Mode • Converter Control A User interfaces with the ACU+ Controller locally using the local keypad and LCD display or locally/remotely using the WEB Interface. • System Components Monitoring and System Alarms Generation (including recording alarms in logs) The ACU+ Controller can also be accessed via SNMP (v1, v2, and v3). • Operating Data Acquisition and Data Logs • Battery Management Figure 1 illustrates the various applications that can be used to interface with the ACU+ Controller. Figure 1. Interfacing with the ACU+ Spec. No: 1M820BNA, 1M820DNA Model No: M820B, M820D 1 Code: UM1M820BNA Issue L, December 11, 2014