Download User Manual

KY-3120DM Industrial Ethernet Switch User Guide
for an authentication. The switch sends a unicast request/identity packet to a
supplicant system and then triggers the transmission timer. The switch will send
another request/identity packet to the supplicant system if it has not received the
reply packet from the supplicant system when this timer times out. The second
case is when the switch authenticates the 802.1x client who cannot request for
authentication actively. The switch sends multicast request/identity packets
periodically through the port with 802.1x function enabled. In this case, this timer
sets the interval of sending the multicast request/identity packets.
The tx-period-value argument ranges from 1 to 65535 (in seconds). By default,
the transmission timer is set to 30 seconds.
Description
Use timeout command to set a specified 802.1x timer.
Use no timeout command to restore a specified 802.1x timer to the default
setting.
Examples
(dot1x)# timeout quiet-period 120
Timeout of quiet period has been set 120 seconds
(dot1x)# no timeout quiet-period
Timeout setting for quiet period has been restored to the default 60 seconds.
System-auth-control
Syntax
system-auth-control
no system-auth-control
View
dot1x view
Parameters
None.
Description
Use system-auth-control command to enable 802.1x globally.
Use no system-auth-control command to disable 802.1x globally.
Examples
(dot1x)# system-auth-control
802.1x has been enabled
Configuration completed successfully.
(dot1x)# no system-auth-control
802.1x is disabled.
Configuration completed successfully
Radius-server
Syntax
radius-server host host-ip-address auth-port auth-port-number [ acct-port
acct-port-number ] key key-string
View
dot1x view
127