Download User`s Manual

Installation:
Keyboard Wedge
1)
2)
3)
4)
5)
Turn off the PC
Disconnect the keyboard cable from the PC.
Connect the Keyboard Cable to the scanner and connect the scanner cable to the PC
Turn the terminal/computer power on.
You are ready use the scanner
RS-232
1)
2)
3)
4)
5)
Turn off the PC.
Connect the Scanner cable to the PC.
Plug the power supply to the scanner
Plug the power pack into power source.
Turn on PC, You are ready to use the scanner
USB (with HID Keyboard Interface)
1)
2)
Plug the USB cable to PC. (some USB hub may have power problem, Check with HUB manufacturer)
Follow the instruction to install windows driver come with your windows operating system.
Note: The scanner may not work with windows 95 or windows 98 first edition.
2