Download PDF format - MagneticLynx

AIRFUEL - Calculate RPM Using VE / Volumetric
Efficiency Engine Mass Air Flow, Engine Size, Inlet
Temperature, Barometric Pressure.
- Port Flow / CSA - On Graph with lines (RPM)
changed from 4 to 6 lines
Main - Added option so User can Enter / Updates Notes
and have them written to the Parameter File
Tools - Added - Logic so that Header Records in PRT /
Delimited files are now Skipped.
- Added - Logic so that Non-numeric fields are now
skipped and do not hang program
- Added Convert DYN (DeskTop Dyno) / CQU (Comp
Cams CamQuest) File for Acceleration
----- 3.24.0 ----ACCELER - Graphing Screen – Added Graph Plus, works
for all Graph types
AIRFUEL - Made changes to Graphing on Analyze Flow
Data so that Graph Plus works for all Graph Types
COMPGAUG - Added Graph Cylinder Pressure against
Crank Rotational Angle
CD_FA - Added some NEW Coefficient of Drag and
Frontal Area for a number of different vehicle
TRANS - Added some new gear ratios
----- 3.23.1 ----COMPGAUG - Added Graph CR against IVC for a Fixed
CGP
- Added Graph CGP against IVC for a fixed CR
GRAPH - Added a 5th and 6th Vertical Moveable Grid
Lines.
- Fixed a few Problems where sometimes no all of a
headings Text would be shown.
GRAPH - Added a Third and Forth Vertical Moveable
Grid Lines.
- Added a Second Horizontal Moveable Grid Line.
Main - Fixed a problem where under rare conditions the
incorrect lash values were written to the Parameter File
Tools - This new Tab Was Added - Contains
Convert Cam File from Inches to MM
Convert cam File from MM to Inches
Convert PRT / Delimited File for Acceleration -- User
Selected Fields RPM and Torque
Convert PRT / Delimited File for Acceleration -- User
Selected Fields RPM and HP
Convert PRT / Delimited File for Graphing -- User
Selected Fields X-Axis and Y-Axis
Reverse Axis for CARFOR Graphing File / PRM
----- 3.22.0 ----AIRFUEL - Added Lift Table for Port Time 2 Report so
Users have control of Lift / Duration points. Increased max
from 18 to 28. These can be entered in any order and the
program will sort them.
GRAPH - There are 1 Horizontal and 2 Vertical Moveable
Grid Lines.
Each of these has their own position display box.
When over the Vertical Moveable Grid Lines the
cross hair cursor will change to an I-Beam to let you know
you are over the line.
When over the Horizontal Moveable Grid Line the
cross hair cursor will change to an Up Arrow to let you
know you are over the line.
MAIN - User can now select to have 3 Moveable Grid
lines displayed on the Graph display screen.
----- 3.21.6 ----AIRFUEL - Calculate VE / Volumetric Efficiency Using
Engine Mass Air Flow, Engine Size, RPM, Inlet
Temperature, Barometric Pressure.
Tools - Added - Increase / Decrease Cam Lift
CARGRAPH - Changed Logic so x and y point of mouse
cursor on graph is more accurate
----- 3.23.0 ----ACCELER - On Graphing Screen - Added a Text Report
which shows RPM / HP / Torque / BMEP with Average,
Minimum and Maximum lines.
AIRFUEL - Port Flow / CSA - On Graph with lines
remove decimal from RPM's
CD_FA - Added some NEW Coefficient of Drag and
Frontal Area for a number of different vehicle
Engine Specs - Added some new Engine Size, Bore,
Stroke, Rod Lengths
TRANS - Added some new gear ratios.
CARFOR Performance Software by World Wide Enterprises - 199