Download Type ACPU/QCPU-A (A Mode)(Common Instructions
Transcript
7. APPLICATION INSTRUCTIONS MELSEC-A Execution Conditions ON Write command OFF LWTP Executed only once Operation Errors In the following cases, operation error occurs and the error flag turns on. • The station number specified at "n1" is not a local station. • "n2" points starting at (D) exceed the specified device range. • Specification of "n2" is other than 1 to 32. POINT If an LWTP instruction is executed by a CPU which is not for data link, or when the mode select switch for the link card is set for OFFLINE, no operation error occurs and M9202 (LWTP instruction enable flag) is set without the LWTP instruction processing. 7 − 84
Related documents
User`s Manual IB(NA)-66789-J
QCPU-A (A Mode) User`s Manual
MODEL 5000/5001
Transition from MELSECNET/MINI-S3, A2C (I/O
RocketRAID 2240 User Manual
- Highpoint
RocketRAID 3220 User Manual v1.0
- Highpoint
Transition from MELSEC-A/QnA (Large Type), AnS
RocketRAID 2224 User`s Manual
QCPU-A(A Mode)User`s Manual
Mitsubishi Electric FR-A7AY Specifications