Download Commander 24 - 48 - Techni-Lux

2. Operation Guide (48 Ch. differences in parentheses)
2.3.1 Running Chase Programs
10
10
8
8
6
6
4
4
2
2
0
0
10
10
8
8
6
6
4
4
2
2
0
0
4. Move the desired Ch. slider 13-24 (25-48) to its
maximum position to trigger the program, and
the program will fade in depending upon current
fade time.
You may press and hold down the relevant Flash
button 13-24 (25-48) to trigger the program.
5. Move the Channel slider to adjust the output
of the current program.
2.3.2 Running a Program To Audio
1. Use built-in microphone or plug the audio source
into the RCA Audio jack.
2. Select your program as described above.
AUDIO
3. Tap the Audio button until its LED lights, indicating
Audio mode is active.
19