Download Hardware User Manual

Transcript
5 Software Support
5.1
BLACKSheep
The Core Module is delivered with a pre-flashed BLACKSheep VDK multithreaded framework. It contains a bootloader for flashing the Core Module via the serial port.
Please consult the software development documents for further information.
5.2
uClinux
The Core Module is fully supported by the open source platform at http://blackfin.uclinux.org. Since the Core
Modules are pre-flashed with BLACKSheep you have to flash uBoot first. You can use the BLACKSheep boot-loader
for flashing uBoot.
In order to use the Ethernet functionality of the TCM-BF518 Core Modules, you need the EXT-BF518-ETH Blackfin
Extension Board.
TCM‐BF518 V1.0‐Hardware User Manual 22