Download DS-Controller-Operation Manual

Data of the DS Series Specifications
1.
2.
3.
4.
DS
At a speed of 10 mm/sec for 5 seconds.
Even load distribution on the slider. Fix base securely to a flat, strong frame. For horizontal use, load should be applied in the thrust direction as
shown in the drawing. If the slider becomes deformed, it will cause poor movement.
At an acceleration of 0,2 G and a speed of 400 mm/sec.
Direction of load moment is:
4.2.2 Low Speed High Thrust Type DS-A5L
Model
DS-A5L
50
100
150
200
Stroke
mm
50
100
150
200
Rated Output
Rated Speed
Rated Thrust
Repeatability
Unit Weight
W
mm/sec
N
mm
kg
2,6
2,8
Motor
Encoder
Input voltage
Specification
Model
Ballscrew
Guide
Motor/Ballscrew Connection
Slider
Base
Side Cover
Motor Housing
Encoder Cover, Pulley Cover
Motor Cable
Grease
2,2
2,4
AC Servo Motor
Encoder Signals:
Together with the motor on the spindle
A B Z phase
Brake
20
200
65,7
± 0,02
Voltage output
+5V
(Homing pulse: 1 pulse ½ rotation)
Dry, single head, on when deenergized,
electromagnetic brake
MB33
Holding torque N
103,0
Single brake torque Nm
Mounting position
Ballscrew axis
Rated voltage
24 V DC
Ø 10 mm, Lead 6 mm, Rolled thread C10, Backlash 0,1 mm or less
Integrated with base, DS dedicated
Timing belt, Reduction ratio 1/2
Hardened alloyed Steel
Extruded aluminium (A6N01S-T5), White alumite treated
Extruded aluminium (A6063S-T5) White alumite treated
Aluminium die-cast, baked finish
Polyacetal plastic
11-conductor composite cable, 5m (standard length)
Ballscrew: Lithium type grease
Guide: Shell Albania Grease No. 2, Mobil Mobilux No. 2
Maximum Thrust (1)
N
131,4
Payload (2, 3)
kg
Vertical: 4 kg
Page 4-11
0,098