Download USER`S MANUAL
Transcript
6. COMMAND STRUCTURE SC SYSTEM CONTROL COMMANDS COSINE RAMP PER AXIS The SC command specifies that the standard cosine acceleration ramp is to be used by the selected axis/axes. MODE AX - AS AA AM AA/CD QUEUE REQUIREMENTS Min (pf) Max (pn/cn) 29 29 29 29 29 29 Not Valid Custom ramp Not valid Not Valid Not Valid Example: Select the cosine ramp for the X axis. Enter: AX SC Example: Select the cosine ramp for the Y and T axes. Enter: AA SC,1,,1; PR# PARABOLIC RAMP PER AXIS PR selects that a parabolic acceleration ramp is to be used by the specified axes. MODE AX - AS AA AM AA/CD QUEUE REQUIREMENTS Min (pf) Max (pn/cn) 15 29 15 29 15 29 Not Valid Custom ramp Not valid Not Valid Not Valid Example: Select a 10 step parabolic ramp for the T axis. Enter: AT PR10 Example: Select a 10 step parabolic ramp for the Y axis and a 8 step parabolic ramp for the T axis. Enter: AA PR,10,,8; PC68 User’s Manual 6-23