Download USER`S MANUAL

Transcript
6. COMMAND STRUCTURE
SC
SYSTEM CONTROL COMMANDS
COSINE RAMP PER AXIS
The SC command specifies that the standard cosine acceleration ramp is to be
used by the selected axis/axes.
MODE
AX - AS
AA
AM
AA/CD
QUEUE REQUIREMENTS
Min (pf)
Max (pn/cn)
29
29
29
29
29
29
Not Valid
Custom ramp
Not valid
Not Valid
Not Valid
Example:
Select the cosine ramp for the X axis.
Enter:
AX SC
Example:
Select the cosine ramp for the Y and T axes.
Enter:
AA SC,1,,1;
PR#
PARABOLIC RAMP PER AXIS
PR selects that a parabolic acceleration ramp is to be used by the specified axes.
MODE
AX - AS
AA
AM
AA/CD
QUEUE REQUIREMENTS
Min (pf)
Max (pn/cn)
15
29
15
29
15
29
Not Valid
Custom ramp
Not valid
Not Valid
Not Valid
Example:
Select a 10 step parabolic ramp for the T axis.
Enter:
AT PR10
Example:
Select a 10 step parabolic ramp for the Y axis and a 8 step
parabolic ramp for the T axis.
Enter:
AA PR,10,,8;
PC68 User’s Manual
6-23