Download Installation Manual Wireless Touch Control Unit

Transcript
Positioning Of The Rf Touch And Rf Devices
Power Supply And Wiring Requirements
Please note: The radio signal range of the RF installation depends on the building construction, materials and position of all devices.
Before final fixing the RF Touch we suggest that a communication test is performed to each actuator from the RF Touch when it is in
the proposed installation location (See menu create and programming sections)
Direct 230V Termination
Power Supply Adapter
Transmission of radio-frequency signals through various materials
Wooden
structures
with
plasterboard
80-95 %
Brick wall
60-90 %

Reinforced
concrete
20-60 %

12V DC plug-in adapter (supplied)
Fitting




Metal plates
0-10 %
230V Supply
A1 - Live (Brown)
A2 - Neutral (Blue)
(The centre termination is not
required)
Standard glass
80-90 %


Double
Insulated
Ensure the electrical circuit is isolated prior to starting any
electrical installation. Any electrical installation must be
undertaken by a qualified electrician in accordance with the
latest IEE Wiring Regulations.
8
Previous
Contents
Contents
Forward
9