Download CompactLogix™ System
Transcript
3-14 Communicating with Devices on an EtherNet/IP Network Producing and Consuming Data The 1769-L32E and 1769-L35E controller supports the ability to produce (broadcast) and consume (receive) system-shared tags over an EtherNet/IP link. Produced and consumed data is accessible by multiple controllers over an Ethernet network. The controller sends or receives data at a predetermined RPI rate. This is the recommended method of communication between Logix controllers. Produced and consumed tags must be controller-scoped tags of DINT or REAL data type, or in an array or structure. Tag type: Description: Specify: produced These are tags that the controller produced for other controllers to consume. • Enabled for producing • How many consumers allowed consumed These are tags whose values are produced by another controller. • Controller name that owns the tag that the local controller wants to consume • Tag name or instance that the controller wants to consume • Data type of the tag to consume • Update interval of how often the local controller consumes the tag The producer and consumer must be configured correctly for the specified data to be shared. A produced tag in the producer must be specified exactly the same as a consumed tag in the consumer. If any produced/consumed tag between a producer and consumer is not specified correctly, none of the produced/consumed tags for that producer and consumer will be transferred. For example, if a CompactLogix controller is consuming three tags that another controller consumes but the first tag is specified incorrectly, none of the tags are transferred to the consuming CompactLogix controller. However, one consumer failing to access shared data does not affect other consumers accessing the same data. For example, if the producing CompactLogix controller from the previous example also produced tags for other consuming controllers but did so correctly, those tags are still transferred to the additional consuming controllers. Maximum number of produced and consumed tags The maximum number of produced/consumed tags that you can configure depends on the connection limits of the Ethernet port on the controller. You can have a maximum of 32 connections through the Ethernet port. Each produced tag uses one connection for the tag and the first configured consumer of the tag. Each consumer thereafter uses an additional connection. Publication 1769-UM011B-EN-P - March 2004